FOGPhotonics’s QA5108 accelerometer employs the latest
linear rebalanced accelerometer technology. It is a small, lightweight, high
performance Accelerometers, suited for navigation, stabilization and flight
control.QA5108 is ideally suited for Inertial navigation systems ;Precision
leveling and measuring systems and Gravity meters.
● Excellent cost to performance ratio
● ITAR free
● Rebalanced quartz pendulum technology
● Broad dynamic range
● Robust design and high reliability
● Internal temperature sensor
● High purity Quartz Technology
● Ultra High resolution
ABSOLUTE MAXIMUM RATINGS (T=25°C)
Parameter |
Value |
Range |
±5g |
Threshold/Resolution |
≤0.05ug |
Bias(K0) |
±5mg |
Bias(k0)Temperature Sensitivity |
±20μg/℃ |
- Composite Error |
≤250 μg |
Bias Long term stability(3Months) |
≤5ug |
Bias Repeatability (day to day) |
≤5ug |
Scale Factor(K1) |
2±0.3 mA/g |
- K1 Temperature Sensitivity |
±20 ppm/°C |
K1 long
term stability |
≤5ppm |
Scale Factor Repeatability (day to day) |
≤5ug |
- Composite Error |
≤400 ppm |
Axis Misalignment |
≤3 mrad |
- Composite Error |
≤100 µrad |
Linearity |
≤15 μg /g² |
Natural Frequency |
>800Hz |
Vibration rectification error |
<20μg/g2RMS |
Environmental |
Value |
Shock |
250 g |
Vibration Peak Sine 20..2000 Hz |
25 g |
Operating Temperature |
-55°C...+85°C |
Electrical |
Value |
Physical |
Value |
Power |
±15V - 2.5W |
Weight |
<90 grams |
CONNECTOR PIN DEFINITION(Unit: mm)
Built in OMEGA PT1000 Temperature sensor
Pin |
Function |
Type |
Characteristics |
1 |
Signal Out |
Analogue |
Acceleration
output, current signal |
2 |
Current Torque |
Analogue |
Current input
test pin |
3 |
Negative Power
Supply |
Power |
-15 V |
4 |
Positive Power
Supply |
Power |
+15V |
5 |
Signal Power
Ground |
Ground |
Ground reference
for power supplies and signals |
6 |
Voltage Self
-Test |
Analogue |
Voltage input
test pin |
7 |
Capacitor plate 1 |
Capacitor |
Capacitor |
8 |
Capacitor plate 2 |
Capacitor |
Capacitor |
9 |
-9 V DC |
Analogue |
Voltage output |
10 |
+9 V DC |
Analogue |
Voltage output |
11 |
Temperature
Sensor Output |
Analogue |
Temperature output,
current signal |
12 |
Temperature
Sensor Output |
Analogue |
Temperature
output, current signal |
Note:
a.When welding products, an electric iron with reliable grounding is needed. The welding temperature shouldn’t be too high,and the welding time shouldn’t be too long, The circuit soldering repetition can’t exceed triple times.
b.± 15V power supply port can not be reversed, and single electrical connection is not allowed(+15V or -15V).
c.In order to prevent electrostatic damage ,please avoid touching the circuit pins directly.
d. Please pick off the protective cap when using this product in the system.
e. An alcohol wipe to clean the products is recommended.
● Gravity meters
© FOGphotonics, inc. | Company | Products | Technoloy | Contact us